• 測量原理不受流體物理特性的影響(例如：粘度和密度)

• 衛生型應用條件下要求*佳清潔能力的專用流量計

儀表特點

• 多種衛生型過程連接

• 3A認證和EHEDG認證

• CIP/SIP清洗后能夠快速恢復

• 一體式衛生型雙腔室外殼，IP69，*多帶 3 路輸入/輸出

• 背光顯示、觸摸鍵控制和WLAN訪問

• 提供分離型顯示單元

特征和規格

測量原理科氏力質量流量計產品標題Easy-to-clean flowmeter with self-drainable single-tube system and a compact, easily accessible transmitter. Dedicated to applications requiring optimal cleanability under hygienic conditions.
傳感器特點Increased process safety – easy cleanable and fully self-drainable tube design. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Large range of hygienic process connections. 3-A and EHEDG conform.
變送器特點Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Compact hygienic dual-compartment housing with IP69 and up to 3 I/Os. Backlit display with touch control and WLAN access.
公稱口徑范圍DN 8 to 50 ( to 2")
接液部件材質Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
測量變量Mass flow (liquid): ±0.10 % 
Volume flow (liquid): ±0.10 % 
Mass flow (gas): ±0.50 % 
Density (liquid): ±0.0005 g/cm³
*大測量誤差0 to 70 000 kg/h (0 to 2570 lb/min)
測量范圍PN 40, Class 150, 20K
*大過程壓力–50 to +150 °C (–58 to +302 °F)
介質溫度范圍Standard: –40 to +60 °C (–40 to +140 °F) 
Option: –50 to +60 °C (–58 to +140 °F)
環境溫度范圍1.4301 (304), corrosion resistant
傳感器外殼材質1.4301 (304), corrosion resistant
變送器外殼材質AlSi10Mg, coated; stainless steel for hygenic transmitter design
防護等級IP66/67, type 4X enclosure 
IP69
顯示/操作4-line backlit display with touch + control (operation from outside) 
Configuration via local display and operating tools possible 
Remote display available
輸出3 outputs: 
4-20 mA HART (active/passive) 
4-20 mA WirelessHART 
4-20 mA (active/passive) 
Pulse/frequency/switch output (active/passive) 
Double pulse output (active/passive) 
Relay output
輸入Status input 
4-20 mA input
數字式通信HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
電源DC 24 V 
AC 100 to 230 V 
AC 100 to 230 V / DC 24 V (non-hazardous area)
危險區認證ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
產品安全性CE, C-tick, EAC marking
功能安全性Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) 
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)"
壓力認證和證書PED, CRN
船級證書3.1 material
衛生型認證和證書3-A, EHEDG